Camera Link Optical Extender

FCL-30ST/FCL-30SR

FCL-300SR_800_01
FCL-300SR_800_02
FCL-300SR-3_800
FCL-300ST-4_800
FCL-300SR-3_800
User’s Manual

산업용 Camera Link Repeater는 산업용Camera와 Frame Grabber 간의 전송거리 연장을 목적으로 설계되었습니다.   산업용 카메라로 찍은 대용량 초정밀 영상신호를 증폭하여 손실없이 실시간 초고속으로 영상취득장비(서버PC등)에 전송합니다.   카메라링크 리피터는 단거리 구리 케이블용과 장거리 광케이블용이 있으며, 전송거리를 연장하여 머신 비전 시스템을 단순화하고 비용을 최소화시켜 줍니다.   산업용 검사장비, 방송통신, 의료영상, 보안등 급변하는 응용산업분야에 신속하게 최상의 솔루션을 제공합니다.

The Industrial Camera Link Repeater is designed to extend the transmission distance between the Industrial Camera and the Frame Grabber.  It amplifies the high-capacity, high-precision image signal taken with an industrial camera and transmits it to the imaging acquisition equipment (server PC, etc.) at a real-time high speed without loss.   There are camera link repeaters for short-range copper cables and for long-distance optical cables, and extend transmission distances to simplify machine vision systems and minimize costs.  It provides the best solutions to rapidly changing application industries such as industrial inspection equipment, broadcasting and communication, medical imaging, and security.

Typical Set Up Diagram

Technical  Specification

  • All of Camera-Link Interface Compliance ( Area and Line Scan)

  • Support Dual-Base / Medium Configuration

  • (CC1 ~ 4, RS232, 6 Ports, LVAL, DVAL, FVAL)

  • Support Pixel clock from 20 – 85MHz

  • Auto detect and Generate Pixel clock

  • Zero loss and transparent transport

  • Locking DC power connector

  • Attaches to the compact SDR26 connectors

  • Status Monitoring LEDs ( PWR, ACT, Error )

  • Intelligent cable disconnect detecting ( Camera cable, Fiber cable )

  • Re-synchronization buttons

  • LC duplex fiber link (2-core fiber)

  • Allows remote operation up to 20km

  • Machine Vision Applications

  • Robot Vision, Robot Eye

  • Product inspection – PCB, LCD, Wafer

  • Bar code reading and sorting

  • Medical Imaging

  • High precision security surveillance

  • Vehicle license plate reading/recording

  • Port/Harbor cargo container management

  • Railroad measurement/inspection

  • Intelligent Traffic Systems (ITS)

  • Border Control

  • Cameras placed in harsh environment

    – Nuclear plant, Chemical plant, Factory

  • Long haul image transmissions

  • Bridge inspection

  • Military & Defense Applications

  • Astronomy

  • Computer microscopy

  • Multi-media

Product Model FCL-100S2 T / R
Pixel Clock Range 20 ~ 85 [MHz]
Supported Camera Configration Base
Sync. Signals LVAL, FVAL, DVAL
Camera Control CC1 ~ CC4 (Master Only)
Serial Communication SerTFG, SerTC (Master Only)
Connector Type Mini Camera Link ( SDR )

Operating Temperature 0 ~ 50[℃]
Input Voltage DC 12 ~ 24 [V]
Typical Supply Current @ 12V DC CM-base 250 [mA]
Connector Type Molex 53259-0329 Male
Weight (Approximate) 300 Gram each module

Operating Wavelength 1310 [nm]
Min Optical TX Output Power -2.5 [dBm]
Transmission Distance More than 2000 [m]
Connector Type LC Duplex
Fiber Type 9/125 um Single-mode fiber